Selling my banded steels.
They are a staggered set 14" wheels (pair of 8" and a pair of 9")
4x100 with Mazda centrebore (54.1) - see below for details of machining out the centrebore to a different size.
Tyres are 185/60/14's with lots of tread left.
I don't know the offsets to hand, I can check tomorrow/Tuesday to confirm. They were originally 5.5" so have 2.5" and 3.5" bands in them.
The wheels were banded by JamesP so you'll know the quality of the banding. There's no kerbing/buckling or dents....really straight wheels. They are all sealed and hold air perfectly.
Painted satin black very recently and there are no chips or scuffs in the paint. There are a couple of runs in two of the wheels, but this was from when they were originally painted gloss black and since painting them satin black they hardly show up at all. Just being pedantic - but it's better to be that way I guess. You won't be disappointed with them.
The wheels are located in Bristol (Area 52) and plenty of people have seen them and can vouch for the condition of them. The photos of the wheels were taken today and any marks are jsut dust from storage. I keep them stacked with a layer of carpet between each wheel to prevent any scuffing of the paint.
The photos of the wheel on my MX5 were taken in April and were on the car for approx 4 day before being replaced with a set of Schmidt Moderlines - the steels haven't been used since and have been stored in my dry, safe & secure lock-up within Area 52.
If you want to fit them to a car with a centrebore larger than the Mazda size, I can get the centrebore's machined out to any other size for not a lot of money if you need them to be bigger. Please let me know if you want this done - I will need the wheels paying for in full before getting them machined though.
Anyway, I'll let the pics do the talking:
£375.00 collected (£25 to post)
Please PM me or leave a message here if you are interested.
Thanks for looking.
They are a staggered set 14" wheels (pair of 8" and a pair of 9")
4x100 with Mazda centrebore (54.1) - see below for details of machining out the centrebore to a different size.
Tyres are 185/60/14's with lots of tread left.
I don't know the offsets to hand, I can check tomorrow/Tuesday to confirm. They were originally 5.5" so have 2.5" and 3.5" bands in them.
The wheels were banded by JamesP so you'll know the quality of the banding. There's no kerbing/buckling or dents....really straight wheels. They are all sealed and hold air perfectly.
Painted satin black very recently and there are no chips or scuffs in the paint. There are a couple of runs in two of the wheels, but this was from when they were originally painted gloss black and since painting them satin black they hardly show up at all. Just being pedantic - but it's better to be that way I guess. You won't be disappointed with them.
The wheels are located in Bristol (Area 52) and plenty of people have seen them and can vouch for the condition of them. The photos of the wheels were taken today and any marks are jsut dust from storage. I keep them stacked with a layer of carpet between each wheel to prevent any scuffing of the paint.
The photos of the wheel on my MX5 were taken in April and were on the car for approx 4 day before being replaced with a set of Schmidt Moderlines - the steels haven't been used since and have been stored in my dry, safe & secure lock-up within Area 52.
If you want to fit them to a car with a centrebore larger than the Mazda size, I can get the centrebore's machined out to any other size for not a lot of money if you need them to be bigger. Please let me know if you want this done - I will need the wheels paying for in full before getting them machined though.
Anyway, I'll let the pics do the talking:
£375.00 collected (£25 to post)
Please PM me or leave a message here if you are interested.
Thanks for looking.