|
|
|
|
|
|
Sold.
|
| |
Corsa Apology Champion 2014.
|
|
|
|
|
|
|
Jul 10, 2009 11:20:06 GMT
|
|
£275 for a micra is a steal. They're twin cam chain driven engines - so you don't need to do the belt. The heater should be a cheap fix too, I cant remember the exact way to solve it - but someone on the Micra forums will know (www.micra.org) I do remember it being cheap and easy though!
Bargain, if I had the space I'd have this today. Hinari is a legend as well - really nice bloke, good luck with the sale!
|
| |
|
|
|
|
|
Jul 10, 2009 22:15:49 GMT
|
|
<Blushes>
Cheers mucker!
|
| |
Corsa Apology Champion 2014.
|
|
|
|
|
Jul 13, 2009 20:27:54 GMT
|
|
Bump:
had a poke round back end of both sills and both will require welding. The nearside is worse than the offside but they will want doing so price reduced.
£200 no offers sorry. You could weld the sills up, run it round for nearly 4 months until the MOT and tax expire and then sell it for somewhere near my asking price on eBay afterwards.
|
| |
Corsa Apology Champion 2014.
|
|
|
|
|
Jul 18, 2009 12:26:41 GMT
|
|
Quick bump.
Can't believe I still have this, it's a belting car for the money and still used most days.
|
| |
Corsa Apology Champion 2014.
|
|
|
|
|
Jul 18, 2009 12:48:10 GMT
|
|
nice looking car. fan is a simple board in the pasanger foot well about £5 from a scrappies and a two second job to do(two screws i think) good luck with the sale. If i had room i would be well tempted
|
| |
|
|
|
|
|
Jul 19, 2009 21:19:49 GMT
|
|
Clean looking car, sills are straight forward to weld at the back.
Can confirm, the heater fault will be a burnt out resistor, they are held in by 2 screws under the dash on the passenger side and they are about a fiver from the scrappy (although I have one on ebay at 99p so far, LOL)
144000 miles is nothing to these engines.
MOT'd these cars with this mileage sell for about £500 (I know, its what I do!) without any hassle. So there is a bargain for any welders who want to make a bundle of extra beer tokens here!
I would take it (especially with the short reg no.) but I am no where near 'up to something'!
|
| |
|
|
|
|
|
|
|
|
Lolzers, 'Uptosomething' is suprisingly near the M6 North you know!
The welding doesn't appear to be needed on wheel arches, just the end of the sills underneath and although I can't weld it doesn't appear to be difficult to repair.
|
| |
Corsa Apology Champion 2014.
|
|
|
|
|
|
|
Bump, still in daily use but could do with it going soon as need to tax my van  |
| |
Corsa Apology Champion 2014.
|
|
|
|
|
Jul 23, 2009 14:03:15 GMT
|
My old car and amazingly reliable, was in my wifes family from about a year old until last year! Really does drive great for its age and mileage I see its picked up an odd extra battle scar!  Hope it goes to a good home it deserves it. Good luck with the sale |
| |
|
|
|
|
|
Jul 23, 2009 14:27:01 GMT
|
I might be up for this if you still have it in a couple of weeks time  |
| |
|
|
|
|
|
Jul 23, 2009 14:55:57 GMT
|
Cheers Dan, I know it came from someone on here but couldn't remember who sorry I have this afternoon discovered the o/s/r footwell was quite wet and on investigation it's going to need a weld in that area too, though it looks like part of the sill. I need to find time to have a really good poke round on a ramp to check exactly what's required. I've had a couple of cash offers but if it's any cheaper I might just as well keep it until the tax and test expire and use it as/when. |
| |
Corsa Apology Champion 2014.
|
|
|
|
|
Jul 24, 2009 18:17:59 GMT
|
|
Sold.
|
| |
Corsa Apology Champion 2014.
|
|
