I had these done a few months ago (By JamesP) for my 106, but it turns out I need some a little wider up front, so I'll bump this pair on:
They are Peugeot 106 S1 Rallye steels with 2.5" added, the offset is around -13 (Minus 13 - They were et18 to start with. Lots of poke but you'll need big arches). Center bore is 65.1mm, so they'll fit over most 4x108 hubs, and they use 60degree taper wheel bolts so theres no need for spigot rings.
They've been shotblasted, sealed, etch primed and painted with Dark Grey 2k paint, it's a decent job with plenty of coats on, but a little flat in places (it's really hard to paint them with such a big dish!)
The tyres are Toyo Proxes T1-R and have done approx 1k miles, and aren't worn unevenly at all or even marked from rubbing.
I'm after £200 ONO for the pair. I can post for £13, or take to the gathering if you stick me a deposit
I can probably also get some more 5.5j or 6j matching wheels to go with these if you want to make up a full set.
They are Peugeot 106 S1 Rallye steels with 2.5" added, the offset is around -13 (Minus 13 - They were et18 to start with. Lots of poke but you'll need big arches). Center bore is 65.1mm, so they'll fit over most 4x108 hubs, and they use 60degree taper wheel bolts so theres no need for spigot rings.
They've been shotblasted, sealed, etch primed and painted with Dark Grey 2k paint, it's a decent job with plenty of coats on, but a little flat in places (it's really hard to paint them with such a big dish!)
The tyres are Toyo Proxes T1-R and have done approx 1k miles, and aren't worn unevenly at all or even marked from rubbing.
I'm after £200 ONO for the pair. I can post for £13, or take to the gathering if you stick me a deposit
I can probably also get some more 5.5j or 6j matching wheels to go with these if you want to make up a full set.