well to cut a long story short, i managed to accidentally cut out the obd2 port from my s-type loom! (first time playing with fuel injection)
i don't suppose on a very narrow chance anyone can shed some light as to were to connect the wires back to? i cant seem to see the obd2 port on a wiring diagram
there are 7 wires.
orange/yellow pin 16
yellow/green pin 13
grey/red pin 2
grey/black pin 7
blue/red pin 10
black pin 4
black/yellow pin 5
if anyone has an s type in bits they could have a follow off the wires? it would be much apreciated!!
i don't suppose on a very narrow chance anyone can shed some light as to were to connect the wires back to? i cant seem to see the obd2 port on a wiring diagram
there are 7 wires.
orange/yellow pin 16
yellow/green pin 13
grey/red pin 2
grey/black pin 7
blue/red pin 10
black pin 4
black/yellow pin 5
if anyone has an s type in bits they could have a follow off the wires? it would be much apreciated!!