volvo 340 lower on one sode after fitting 2" blocks

mini-mad-nick Part of things Posts: 918	volvo 340 lower on one sode after fitting 2" blocks mini-mad-nick @iisyou
	Jul 20, 2014 11:48:41 GMT Select Post Deselect Post Link to Post Back to Top
	So i fitted some 2" blocks to the back of my 340 yesterday along with some landie 90 shocks. I loosened off the panhard arm that goes from the axle to the body on the drivers side. What could cause it to sit a good 15-20mm lower on the drivers side than on the passenger? Also noticed that when fitting the shocks, the lower body of the shock touches the hub carrier? Surely this cant be right?
	Nobody dies a virgin, because lifes curse word us ALL

	Reply Quote

composimmonite Posted a lot Posts: 4,681	volvo 340 lower on one sode after fitting 2" blocks composimmonite @composimmonite
	Jul 20, 2014 12:35:12 GMT Select Post Deselect Post Link to Post Back to Top
	Have you used the car for "drifting" ? I was after a 340 De-Dion rear axle for my Marlin and was told they are in demand due to getting bent by people drifting and wonder if that might be the case with your car - it was bent before but is more noticeable now lowered.


	Reply Quote