wanted - 32DGR Weber carb or Lada carb

[PandaSelecta]

If i am unable to find and fit some bike carbs, i will have to find a weber 32DGR or Lada carb. So what have you got?

[Kieran]

The manifold will take any standard twin choke weber so look for a 32/32 dgav or similar off a 1.6 cross flow or a pinto carb.

We run a 32/36 on Jenns 1500 estate, but it was quite thirsty. Found a single choke dellorto, and made a flat adapter plate and it gave similar performance but ran a lot better.

[Mystery Machine]

I've got a Weber carb from a Lada at the unit. I'll get more details for you when I'm down there next.

[Mystery Machine]

Some photos - comes complete with the adapter plate, air filter housing etc....













As said, I'll get you more details when I'm next at A52 (probably tomorrow)

[PandaSelecta]

No hurry, just let me know the model, and also the price you want for it

[Fennec]

If I recall correctly Bruce, that is the one for the Samara, which isn't bad thing, as the 32/36 Kieran mentioned is a bit over-jetted for the 1200 PS has.
I could be wrong but I seem to recall liberating that one from a scrapyard in Essex for no particular reason and then dumping it in the A52 tat pile when I realised it was no good for my 1500. ;D

[PandaSelecta]

Bruce, did you get any details on the Lada carb?

[Mystery Machine]

Sorry Dude, I haven't had a spare moment to get to the unit this week. I'll hopefully have an hour or two over the weekend so will pop over then and get some details for you.

Aplogies about that...

[PandaSelecta]

No need to apologise, work/family has a tendency to take up any time we think is spare, just get the details when you can

[paulisa]

i have a complete 1500cc motor only done 46000 miles i think it looks like it has a new carb on it it starts and runs perfect would the carb be of any use also looks to have a new ecu all bits to be sold cheap as doing a engine conversion let me know if any good and i will get pics

[PandaSelecta]

how much for the carb?

[paulisa]

£20 for the carb and i can post it for cost price

[Mystery Machine]

Aug 1, 2014 14:46:11 GMT PandaSelecta said:

No need to apologise, work/family has a tendency to take up any time we think is spare, just get the details when you can

Yay!

Finally managed to get down to the unit today. Apologies again for the delay in getting the info to you.

Here are some shots of the numbers on the carb.









I measured the throttle bores and, just as on the stamped area, they are 32mm and 34mm.

Hope that helps?

[PandaSelecta]

Looks like the type off a Samara 1300, so hopefully will fit a 2101 too. How much did you want for it, and can you post it?

[PandaSelecta]

up

[Fennec]

It will fit the 2101, but I think you won't need the base adapter plate.

[PandaSelecta]

the samara weber carb apparently doesn't fit. So I have bit the bullet and bought a brand new Weber conversion from Webcon.

[Mystery Machine]

Just out of curiosity, what was wrong with the Weber I sent you all the details of? I never heard back from you....

[PandaSelecta]

I asked one of the Lada guys off facebook and they said that the weber from the skoda* needs a different fitting kit, one which doesn't exist. Will link this thread though, so any samara owners on facebook can buy your weber

*samara

[Fennec]

A Samara isn't a Skoda.