Cheap set of borbet A, 16x7.5 4x108. Two centre bores have been opened up for ford fitment, two are still smaller (i ran 20mm spacers on the back so didn't need to open them up). One has a flat spot on the inside lip, I used sealant on this as a matter of course and it held air fine, it may do so without the sealant but as I never tried it I couldn't say for sure. One of the centre cap bolts have been messed about with in the past but still holds the cap on fine.
All 4 borbet flat caps are present. From memory the have very little kerb damage, maybe non but I will have to double check. They have tyres but not sure how good they are and again I would have to check.
I have no individual pictures but can get some over the next couple of days.
All in all they are not the best condition but price does reflect this and they do look very respectable in appearance
All 4 borbet flat caps are present. From memory the have very little kerb damage, maybe non but I will have to double check. They have tyres but not sure how good they are and again I would have to check.
I have no individual pictures but can get some over the next couple of days.
All in all they are not the best condition but price does reflect this and they do look very respectable in appearance
