|
|
|
|
|
|
Ello all.
Trying to find some of the above, specifically: 5x112 to 4x114.3, and 4x114.3 to 5x130.
Who can help me out with the whereabouts for such items?
|
| |
|
|
|
|
|
|
|
Feb 24, 2015 11:53:22 GMT
|
Ello all. Trying to find some of the above, specifically: 5x112 to 4x114.3, and 4x114.3 to 5x130. Who can help me out with the whereabouts for such items? 5x112.to 5x114.3 you could probably get away with wobble bolts.. |
| |
Last Edit: Feb 24, 2015 11:53:49 GMT by 86corolla
|
|
edk83
Part of things
Posts: 849 
|
|
Feb 24, 2015 12:23:31 GMT
|
|
There is a listing on ebay for custom made ones, I may have to use some
About £70 a pair
|
| |
|
|
Dez
Club Retro Rides Member
And I won't sit down. And I won't shut up. And most of all I will not grow up.
Posts: 11,712
Club RR Member Number: 34
|
PCD adaptors?Dez
@dez
Club Retro Rides Member 34
|
Feb 24, 2015 13:51:02 GMT
|
|
They are both conflicting PCDs, any adapters will have to be two-piece.
|
| |
|
|
VIP
South East
Posts: 8,293
|
|
Feb 24, 2015 15:42:40 GMT
|
Ello all. Trying to find some of the above, specifically: 5x112 to 4x114.3, and 4x114.3 to 5x130. Who can help me out with the whereabouts for such items? 5x112.to 5x114.3 you could probably get away with wobble bolts.. Is it possible to wobble bolt out an entire stud? |
| |
|
|
VIP
South East
Posts: 8,293
|
|
Feb 24, 2015 15:44:41 GMT
|
|
|
| |
Last Edit: Feb 24, 2015 15:47:31 GMT by VIP
|
|
|
|
|
Feb 24, 2015 16:18:26 GMT
|
5x112.to 5x114.3 you could probably get away with wobble bolts.. Is it possible to wobble bolt out an entire stud? no doubt it only good for a few mill anything over you will need adaptors |
| |
|
|
VIP
South East
Posts: 8,293
|
|
Feb 24, 2015 16:19:35 GMT
|
|
But the OP is asking for a 4-stud to 5-stud adaptor...
|
| |
|
|
edk83
Part of things
Posts: 849
|
|
Feb 24, 2015 17:07:20 GMT
|
|
|
| |
|
|
|
|
|
Feb 24, 2015 17:55:04 GMT
|
But the OP is asking for a 4-stud to 5-stud adaptor... My bad miss read it lol |
| |
|
|
|
|
|
Mar 30, 2015 12:11:45 GMT
|
|
Cheers guys. The 4x114.3 to 5x130 ones are no longer needed as I have had to sell those wheels.
But still on the lookout for 5x112 to 4x114.3.. Whats with those 2 piece ones? Havent seen those before..
|
| |
|
|
VIP
South East
Posts: 8,293
|
|
Mar 30, 2015 14:06:21 GMT
|
Cheers guys. The 4x114.3 to 5x130 ones are no longer needed as I have had to sell those wheels. But still on the lookout for 5x112 to 4x114.3.. Whats with those 2 piece ones? Havent seen those before.. You won't get a 4x114.3 to 5x112 that ISN'T a two-piece adaptor, it's impossible. I ran 4x100 to 5x114.4 two-piece adaptors on the Civic and they were just fine. |
| |
|
|
Nathan
Club Retro Rides Member
Posts: 5,626
Club RR Member Number: 1
|
PCD adaptors?Nathan
@bgtmidget7476
Club Retro Rides Member 1
|
Mar 30, 2015 15:05:16 GMT
|
I had some made by these guys, not cheap if you want custom type but good quality. Superforma |
| |
|
|
|
|
|
Mar 30, 2015 15:38:33 GMT
|
Yeah, I spoke to superforma before, but they were going to cost more than the wheels did.. So looks like I'll just have to wait a while and gather some funds. Cheers guys  |
| |
|
|
