Modified Porsche 924 Turbo S2 £1795 Blackburn

[commervan]

Hi its taken a long time to make this decision but i finally need to part with my 924 turbo after 18 years of ownership it started of as a standard car but after some faults arose it ended up as a full build by an enginner at a cost of thousands  .
Its been on and off the road over the years due to various reasons and has spent much of its life in storage this has been good and bad for the car as its avoided the rust but has gained some storage damage and the paints sand and micro blistered in places . There is a dint in the rear quater and the filler and paint is cracked . A small dint on the passenger wing . But the biggest issue is it requirs a front bumper because its brokn where it silpped into the  3rd wheel whilst being loaded onto the trailer .
But still runs and drives good so here whats been done
Lowered alot on bilstien suspension ( was built to be track dayed )
Up rated bushes
Full engine build inculding front mounted intercooler conversion
New brakes
New torque tube
Custom mate air craft alloy front hubs to run porsche 17" hubs and still fit under the arches whilst low
Full stainless
All parts powder coated when removed
Turbo rebuilt again approx 2 years ago
This car has major potiental and really needs a paint job and currently has no MOT but all electrics work and so shouldnt fail on much but is currently been sold as is and the price reflects this .














































So there it is worts an all its a fast fun project car which deserves some fresh love I'm going on holiday on monday for 10 day so ill post my number when i return and i can awnserany questions or come and have a look £1795 ono cheers Phil

[compass]

Hmm, potentially interested in this.

Do you have receipts for all the work done, and what other plasterwork is there? When was it last on the road, what are the sills like? Oh, and where are you located?

Thanks

[commervan]

Yes i have the build sheets and photos taken at the time .
Plaster work I'm guessing is filler ?? Apart from what ive shown there is some sinking of the filler in places but no other areas needing actual repairs .
It was last on the road in 2013
I shall check the sills but as far as i know they are good the only welding its had whilst ive had it is at the bottom of the passenger wing just behind it .
I'm in Blackburn Lancashire cheers

[compass]

Cheers..... Sorry about my predictive text.... Plasterwork was meant to be paperwork! Good to know about the sinkage too though! Could still be interested if the respray and bumper are the main issues.

[commervan]

Deposit taken

[Battenberg]

Damn you long drinking and hangover, how did I miss this!

More than a bargain, it's a deal, it's a steal

[pSyCoSiS]

We all missed out on a true bargain there!