|
|
|
|
|
|
Hi all. Been tidying my hrv and welded a patch in the lower wheel arch . Tried to blend in the paint but it reacts badly with the edge of the old paint. Any thoughts? Thanks Jed
|
| |
|
|
sparkyt
Posted a lot
selling stuff
Posts: 1,767
|
|
|
|
|
It happens . Try flatting it back off and warming the area with a hair dryer
Dust 2k primer over the area and heat with the dryer after to cure the thinner out of it quickly. ..
One of the old costs of paint has reacted with your new paint thinners
|
| |
|
|
|
|
|
|
|
|
Cheers will try that. Was wondering about a barrier coat or isolator ?
|
| |
|
|
|
|
|
|
|
|
barrier coat is the last resort
let it dry out and sand it back smooth , then light coats is the way to go
|
| |
91 golf g60, 89 golf 16v , 88 polo breadvan
|
|
|
|
|
|
|
|
Managed to do it. Not going to win any prizes but looks fine and is a lot better than the rusty hole that was there before. Used a bit of etch primer in the end with very light dusting. Cheers for all the advice.
|
| |
|
|
