|
|
|
|
Bolf
Part of things
Posts: 507 
|
|
|
|
|
I don't think your pictures have worked buddy
|
| |
|
|
turbom
Part of things
Posts: 393
|
|
|
|
|
No pics here either..
|
| |
|
|
|
|
|
|
|
Still mucking about with Photobucket, tried also to edit the last post and add photos again. Anyway; next stage was cleaning and removing the draws, you need the special snap on release tool to take out draws. Then draws were cleaned and particular attention to the accumulated gunk in the draw runners.   |
| |
|
|
|
|
|
|
|
|
You need to copy and paste the IMG URL from photo bucket as we still have no pics
|
| |
96 E320 W210 Wafter - on 18" split Mono's - Sold :-(
10 Kia Ceed Sportwagon - Our new daily
03 Import Forester STi - Sold
98 W140 CL500 AMG - Brutal weekend bruiser! Sold :-(
99 E240 S210 Barge - Now sold
02 Accord 2.0SE - wife's old daily - gone in PX
88 P100 2.9efi Custom - Sold
|
|
|
|
|
|
|
|
Thank for that, I think I Might have got it.
|
| |
|
|
|
|
|
|
|
|
Pictures are working for me. Previous owner was a Volvo fan by the looks of it!
|
| |
1968 Cal Look Beetle - 2007cc motor - 14.45@93mph in full street trim
1970-ish Karmann Beetle cabriolet - project soon to be re-started.
1986 Scirocco - big plans, one day!
|
|
|
|
|
|
|
|
Great, the guy I got it from worked in a Volvo dealership
|
| |
|
|
|
|
|
|
|
Over the holidays I managed to get to work, got all the stickers off and stripped out both boxes. I sorted out all the dents and sprayed all the bits. I used a small HVLP gravity feed gun and red smoothrite, which seems a good match in colour to the original.   The red primer was from Toolstation and worked well as an undercoat.  I found I was getting lots of overspray over everything else around so I made a sort of Dexter style tent out of plastic sheet.  finished top box  I was pleased with how it turned out, its not a perfect finish but at the end of the day its a tool box. |
| |
|
|
turbom
Part of things
Posts: 393
|
|
|
|
|
That roll cabs an old-en lock in the side??
I have the same one with my home tools in.
I remember around 20 years ago we had to do a roll cab for our snap on dealer.
And had to weld up the bottom of the roll cab and he supplied the paint.
Deffo worth doing..
|
| |
|
|
|
|
|
Jan 18, 2017 21:38:16 GMT
|
More progress, lined all the draws with grip mat. I also bought some Eva foam floor matting from Halfords. I manged to cut this out on the laser cutter at work and sandwiched it up with some 3mm red EVA and stuck the three layers together with Evo-stick, quite pleased with the result.  layers of EVA  Fitted  |
| |
|
|
|
|
|
Jan 18, 2017 22:03:04 GMT
|
I have now started a sort of angle grinder rack; I got some square section steel salvaged from some broken tables, I want it to be able to hold 4 grinders on two arms that will swing out for use and fold back for storage, here's a CAD drawing, I started drawing the wheels on it but lost interest.  It's going to roll on casters I got a set last week from Lidl for a fiver!  Started with the frame  |
| |
|
|
