I'm changing the indicator stalk to a switch.
From the pics can anybody identify what I need to do here
I've identified
Green and brown to be the live from flasher unit
Green and white to be right turn
Green and red to be left turn
Light green goes to the warning lamp on the end of the stalk and will be eliminated
Now I have a black and a brown and black
The brown and black goes to a copper contact that makes contact with a copper ring around the steering column. I'm not sure if this is the live side of the horn and the black is providing the earth through the column
pic site
New switch has only three wires
So that's the three green with chasers, the light green is obsolete
Which leaves the black and brown and black.
From the pics can anybody identify what I need to do here
I've identified
Green and brown to be the live from flasher unit
Green and white to be right turn
Green and red to be left turn
Light green goes to the warning lamp on the end of the stalk and will be eliminated
Now I have a black and a brown and black
The brown and black goes to a copper contact that makes contact with a copper ring around the steering column. I'm not sure if this is the live side of the horn and the black is providing the earth through the column
pic site
New switch has only three wires
So that's the three green with chasers, the light green is obsolete
Which leaves the black and brown and black.