16 inch 4x108 steel rims - what choices do I have?

[60six]

Need some 16inch steels for the 9000 - 15's look quite odd!

I know citroens have some 16 inch steel wheels but everything else seems 5 stud.

This design is awesome for a steelie but they are only 5 stud



Any help greatfully recieved

[v8ian]

If you want a simple basic steel akin to Lotus Rims, There are options, but I am afraid all would need banding, Firstly there is the early Hillman minx from the 50/60s they are 15s though, Then there is Austin Devon & Somerset, they were produced 1949 thru to late 50s, they are 16s, and then there are Austin Devon Commercials, Vans, Pickups and Countrymans were fitted with 17s, I'm 99.9% sure thy are all 108 on 4,

[Mercdan68]

Peugeot steels are great looking

[welshpug]

plenty of pug steels in 16", offsets are close, centre bore is the same, however on googling it seems saab used an M14 bolt, psa have used m12 for years, so you might need to get stepped studs from 14 to 12 to use them.

[Mercdan68]

Peaugeot 3008

[60six]

Jan 20, 2020 19:35:47 GMT Mercdan68 said:

Peaugeot 3008

ooh excellent - Will start a search - Thanks for that

[60six]

Jan 20, 2020 18:00:00 GMT v8ian said:

If you want a simple basic steel akin to Lotus Rims, There are options, but I am afraid all would need banding, Firstly there is the early Hillman minx from the 50/60s they are 15s though, Then there is Austin Devon & Somerset, they were produced 1949 thru to late 50s, they are 16s, and then there are Austin Devon Commercials, Vans, Pickups and Countrymans were fitted with 17s, I'm 99.9% sure thy are all 108 on 4,

never realised 16 inch went back to those early days! Thought they were all odd metric type back then

[fraudownersclub]

Berliing or partner van rims are the size you need get them in black or silver

[fraudownersclub]

These are 3008 rims 17”

[ruairi50]

berlingo / partner 14/15inch 4 hole expert / dispatch / scudo 15/16 inch 5 hole

[fraudownersclub]

Citroen c4 are 16” 4 stud

[fr€$h&m1nt¥]

The oponeo website is really good for finding steel wheels of particular fitment if you're happy to buy new rather than buying second hand on a budget.

They even list offset and centre bore as part of the results...

www.oponeo.co.uk/steel-wheels-finder#&&/wEXCAUTcGNrX1RyTFNCb2x0UGF0dGVybgUFNHgxMDgFDHBja19UckxTSG9sZQUBMAUHcGNrX0NQZwUBMQUHcGNrX0lQUAUCMjQFCnBja19UckxTUFQFATAFDHBja19UckxTRGlhbQUCMTYFCHBja19JT0ZQBQIyNAUKcGNrX1RyTFNQRgUBMHtNOqqICjloWhifQ+dPX2byllTz

If you cross reference back using the manufacturer / model search you'd be able to find out the equivalent sizes if you would rather find second hand ones listed by model on ebay etc.

[60six]

I tend to find at the moment that a set is always over 100, new is around 160, but individual, scruffy without tyres are 20. Its all about condition though and I really am tempted to buy new.

looking on oponeo now

[60six]

Now a new dilemma I didn't expect - how many vent holes? lozenge type holes, 2 small holes then one large hole? If they just listed one type of hole I wouldn't have an issue - too much choice ! Trust me to get obesessed with what essentially is, nothing!

Oponeo is where I am buying though - thanks fr€$h&m1nt¥

[froggy]

I’ve used Citroen c5 Steels , look the same as the 3008 tbh . Just got another set from openeo? So I have a set with rainsports and another with 888,s for trackdays