Cheers mark will have to have a look. The motor factors in leeds are turd but hopefully they will have some.
Do you reckon its worth buying a cheap rotary sander for doing the basic filler shaping? I used a black & decker sander to do the last bit of filler work I did and it worked OK but new sanding pads are a right ripoff for them.
Post by blackpopracing on Oct 18, 2007 22:42:18 GMT
In a word Matt, no.
If you have a decent compressor, then get a DA sander, though I think you can get leccy ones too somewhere.
Thats the beauty of using professional filler though, it sands off so much easier than halfrauds crap. For good sanding, look at www.flexiblesanders.co.uk/products.php?cat=7 they aint cheap, but nothing good in this life is, they are worth every penny and more, get the self adhesive sandpaper for them.
I have no compressor at all at my girlfriends so no air tools :-(. I might try and find a leccy one i've not got too much filling to do all the rot is underneath. Cheers for the link might invest in a set.
will try to find them mark, they take a lot of abuse(by hooligans at work!!!) but some of us have been using festools this past 6 months, with auto extraction system(ok a vacum cleaner!!!) they realy are nice, no dust, grind facility as well as da.
Man, you should be so chuffed with this car. I wouldn't be able to anything on it after I'd done the floor because I'd spend too much time standing back, looking at it and saying 'I made that' to myself.