more diy plans

[93fxdl]

right attempt no2 (first attempt lots of puter speak but no pics)
a few years ago I found various diy plans for garage equipment but due to all sorts of problems have been unable to use any (but am starting to get my mojo back so who knows what tomorrow will bring)
I am not aware of any copyright issues with these plans but if any arise I shall do my best to take them down immediately
bench folder
tracking gauge

engine stand





I also have plans for a couple of engine lifts and a hydraulic press to be added well if I can get them to appear
ttfn glenn

[slater]

Nice mate, i might have a go at the bench folder.

I make alot of kit like this (better than buying it!) but i normaly just copy a picture in machine mart or something. Done an engine stand, arch roller, 4 roll jigs, god knows how many press tools for verious hole punching swaging, bending work. Even did a manhole lifter the otherday.

[93fxdl]

here are plans for a lift table for working on bikes etc
pagesperso-orange.fr/claude.lecoq/table/
its in french but the drawings are pretty simple
ttfn glenn

[mightyminijack]

Not bad plans there mate, gonna have a go at the Sheet metal folder.

me and my dad made a heavy duty pipe flaring tool, the type for alumnium pipes and silcone hoses to prevent blow offs, i'll try get a few pics up some time. Might come in handy

[93fxdl]

right hopefully here are some plans for a press





next will try to put up plans for an engine crane i have 2 but have realised one of them is a scan of a practical classics magazine project so i will not put that one up but i have to sort through my photobucket as pages of the two may have gotten mixed
any other plans are more than welcome as now my mojo is returning i intend to get going with projects with my kids as well as keeping the 78 transit camper going, keeping the patina at bay on the 93 harley and who knows the 86 honda cbr and the 74 beetle might get some lovin
ttfn glenn

[93fxdl]

had a couple of down days but as promised here are some plans for buiding an engine lift






ttfn glenn

[93fxdl]

80ll0ck5
looks as if part is missing so will have to have a search back through my old puter to see if i can find the missing bit but planning some father and son project time this weekend so will try to fix it when i can (provided i do actually have the missing bit
ttfn glenn

[93fxdl]

ok have finally found the missing bits so will now try and add them







hopefully that has got it all up have found a couple of plans for pipe and tube benders so will post them when i can
ttfn glenn

[khaOs]

Could you post the pipe and tube benders? These have been really helpfull

[93fxdl]

here you are
favoriteprojects.com/how_to_build_a_tube_bender.htm
will try and find the other
ttfn glenn

[93fxdl]

and no sooner said than done
www.thefont.pwp.blueyonder.co.uk/bikes/tube_bender.htm
ttfn glenn

[khaOs]

Thanks a lot! I knew the first one but the one with the fiesta drums might be cheaper to make