mirafioriman
Posted a lot
My next project.......
Posts: 1,361
|
|
Sept 29, 2012 19:41:44 GMT
|
The strut turret was heavily corroded. I cleaned it up and zinc primed it some time ago but now it looks like this: So at least part of it will need replaced. I set about removing the one from my pieces of scrap shell today: This one cleaned up much better I've protected it with zinc primer (and copper!) for now:
|
|
|
|
mirafioriman
Posted a lot
My next project.......
Posts: 1,361
|
|
Dec 30, 2012 17:47:05 GMT
|
I've started again. Got on with finishing the car roller this afternoon. Went to take pictures and the camera kept turning itself back off so no pictures. Car work: Got one leg fitted to the second support for the car roller. The Portamig welded beautifully and the Sperian Optrel e680 performed well too. Camera diagnosis: I thought the batteries might be flat (although I'm sure I haven't used it since I last charged them) When I took them out to charge them back at home I discovered three were 2500mAh and one was 1700mAh. I'm hoping this is why the camera kept switching itself back off. I've put a set of four of the 2500mAh ones on charge now, hope this fixes things as I don't want to be buying a new camera.
|
|
|
|
|
mirafioriman
Posted a lot
My next project.......
Posts: 1,361
|
|
Dec 31, 2012 19:43:02 GMT
|
Well, the camera appears to be fixed (thankfully) did funny things when it first turned on as if it re-set itself or something. No work today but they'll be pictures next time
|
|
|
|
mirafioriman
Posted a lot
My next project.......
Posts: 1,361
|
|
|
Well, first job of the day was to fix my pillar drill. Progress had previously been very slow as when I applied any pressure the drill stopped turning Turned out the problem was this: The nut was loose despite being a left hand thread. Tightened it up and all was well again Did plenty of this: Welded captive nuts on various pieces: Welded together: Quite pleased with the Portamig welds compared to an example of the SIP welds below: So this is where we are up to now: I don't know what's wrong with me but I left my work bench area looking like this More soon
|
|
|
|
xlexx
Part of things
BMW`s garage / Zaz 965a V4 1968 / Leyland 400
Posts: 49
|
|
|
what result?
|
|
maymotors.ru
|
|
|
|
|
What a cracking read, if only i could get motivated on my car
|
|
|
|
EmDee
Club Retro Rides Member
Committer of Autrocities.
Posts: 5,920
Club RR Member Number: 108
|
|
Jun 14, 2013 10:02:09 GMT
|
HERO!
|
|
|
|
Carsie
Part of things
Posts: 127
|
|
Oct 11, 2014 20:12:53 GMT
|
How you getting on ?? Haven't had an update recently
|
|
|
|