|
|
|
So things have changed and its time to clear my workshop of all the viva parts and cars in there. I'm back close to the workshop so its easier to get to the bits and get stuff sold.
I've got a 4 door 1972 1800 SL that's been off the road for quite a few years but is mostly complete. I took it off the road to put sills and a drivers side floor in it and never got it finished. I'll do a for sale ad and pictures when I can get to it.
I also have a 1978 HC estate with a 1256 engine. This was my daily til the manifold split. I managed to get a replacement but then the carb leaked. Carbs been rebuilt but I've not had chance to get it running on the rebuilt carb. Its a great car with only about 20k on hte clock but its not mint. I'll be trying to get this running before I put it up for sale unless I get a good offer as it is. Again, pictures and its own for sale thread when I get to it.
As for spares, I have a few.
Lots of 2.3 engine parts and complete engines. At least 2 2.3 front subframes, some rear axles, upper and lower arms, engines, big valve heads, performance cams, overdrive gearboxes, NOS rear arch panels, NOS chassis rails, glass fibre front wings, glass fibre bonnet, 4 branch manifolds, twin twin 48 delortos on manifold, twin twin 40 webers on a manifold plus spare chokes, 2 door doors, coupe boot lid, interior trim, exterior trim, glass, lights, rostyle wheels and a set of Eagle slot mags with centres and nuts including the locking nuts and key.
Anyway, I'll be sorting through and posting bits as and when I get chance. I've got loads of little bits but would prefer to shift some of the big bits first. Feel free to ask though and I might have what you need.
If anyone wants to come browse then pm me and we can work something out. Everything is in Northampton.
My time to get things packed and posted is limited so collection and pony express might be easier for those further away but anything's possible.
Cheers.
Jody.
|
|
Last Edit: Feb 6, 2011 3:44:46 GMT by harryhyde
|
|
|
purplevanman
Posted a lot
Way too orangey for crows
Posts: 3,829
|
|
|
pics of the slots and a price
|
|
|
|
twigzy
Part of things
In rust we trust
Posts: 755
|
|
|
you have a pm
|
|
TWIGZY 17
|
|
|
|
|
prices on fibreglass bits, wings bonnet etc and possibly the manifold and twin 40's please and a location pm me if possible with prices
|
|
|
|
|
|
|
Hiya you aint going to sell nought without pics/prices mate I'm localish so can collect to start off with both sets of webers please? Ta Gra ps can supply email to send pics to may be easier than trying to upload them on here but prices first please
|
|
|
|
craig
Posted a lot
Posts: 1,029
|
|
|
Might be interested in the coupe bootlid and a Firenza/Magnum rear axle. Can you send me pics and prices please?
|
|
|
|
B-8-D
Posted a lot
down to one car!!
Posts: 4,038
|
|
|
You've got pm I need various bits..
|
|
|
|
|
|
Jan 22, 2011 14:50:27 GMT
|
interested in a OHC rear axle with upper arms. where abouts are you?
|
|
|
|
|
|
Jan 22, 2011 18:18:56 GMT
|
PM sent my good man. I'll have just about everything please!
|
|
|
|
stefan
Posted a lot
If it isn't broken fix it till it is
Posts: 1,598
|
|
Jan 22, 2011 18:57:19 GMT
|
Is the 1800SL manual or auto
|
|
POWER IS EVERYTHING WITHOUT CONTROL
1985 Honda jazz 1997 Saab 93 convertible 2010 transit 280
|
|
|
|
|
Jan 22, 2011 21:48:24 GMT
|
Evening all.
Got a load of PM's to reply to so bear with me and I'll get back to you all.
Cheers.
Jody.
|
|
|
|
Macoli
Part of things
Posts: 181
|
|
Jan 22, 2011 23:28:41 GMT
|
What size are the Rostyles, and are they tubeless?
|
|
Wanted: mk2 Cavalier front valence
|
|
|
|
|
Okay. Lots of interest in some of the bits I have so will start with the bits I can get to and work my way through. If there's a bunch of stuff you want and you can get to me then that'll be the best way as some of it needs cars moving to get to. I'll put pictures and prices up as I dig through. The prices are pulled out of the air so if they seem too high then make me an offer. Look at them as a starting point. Will try and reply to pm's on bits I haven't got to yet. Here's what's left of a pair of front wings. Useful for repair sections. I used the bottom of one for my viva estate. Tubular 4 branch manifold. This I believe is a chevette one and needs the club engine mounts fitting. Nice condition but has surface rust and dust. £100 My internet has started playing up so this is it for now. Will get picks of the carbs up tomorrow along with a bunch of lumenition modules and a viva 2.3 dizzy with lumenition fitted. Cheers. Jody.
|
|
Last Edit: Mar 29, 2011 23:43:19 GMT by harryhyde
|
|
|
|
|
Here's some more stuff. Here's the pictures of the front wing pieces that didn't appear in the first ad. Here's what's left of a pair of front wings. Useful for repair sections. I used the bottom of one for my viva estate. £20 Unused pattern passenger side sill. £20 New old stock chassis repair sections. Marked up for a HB but I believe they are the same as a HC. Can't remember what these are new so I'll say £50 for the pair until someone tells me they can get them for that price new. A pile of electronic ignition units. There are 5 lumenition boxes, optical pick ups and some cutter wheels. There's also a Pirahna electronic ignition here as well. £60 the lot or let me know if there's anything anyone needs out of the pile 2.3 distributor with lumenition fitted and silicone leads. £50 Electric fuel pump for carbs, think this is a 4 PSI one and I have a regulator to go with it. £30 K&N pancake filters to go on the back of webers £20 Fibreglass filter box for webers. £20 12 row oil cooler £15 Blydenstein Power inlet manifold with thermostat housing. £50 And another one. I do have the housing cover for this. £50 Pair of 40DCOE twin choke Webers Offers on these as I don't know what they're worth nowadays. Not been used for a while but came off a running car. I also have a set of 37 chokes and a set of stainless steel trumpets similar to the ones fitted on this set. For some reason I didn't get a picture of these though. £20 Set of 48 dellorto's with linkages, manifold and airbox. Unfortunately there's no airbox lid though. I may have the thermostat housing for these too but need to double check the box they're in. These are jetted to suit a big valve head. Again, offers on these as I'm not sure of the going. I can remember what I paid though and they weren't cheap. Not too many replies from my last listing so if the prices are way out then make me an offer. I have no use for any of this any more and need to fund other hobbies. I'm away this weekend but next weekend I'll get some pictures of the estate and some of the bigger bits that are hard to get to. Also a good time to come look if you're interested. Cheers. Jody.
|
|
Last Edit: Feb 6, 2011 3:43:22 GMT by harryhyde
|
|
slammed 66
Posted a lot
www.gtturbo.org
Posts: 1,672
|
|
|
I'm after some quad headlamps and the mounting panels. Don't suppose you've got any?
Ross
|
|
86 Renault 5 GT Turbo 89 Renault extra 91 Skyline GTR 98 Mini 1275 mpi 99 Autech Rider www.gtturbo.org
|
|
icedmunkie
Part of things
All smoke.... No poke
Posts: 150
|
|
Jan 26, 2011 10:52:57 GMT
|
2 pms sent mate
|
|
1972 Vauxhall Firenza 1.8 MX5 powered 19something Land Rover Series 2 (in bits and not started)
|
|
|
|
|
All PM's now replied to.
More parts to be added next week.
Make me an offer for anything you're interested in.
Cheers.
Jody.
|
|
|
|
v8ade
Part of things
Posts: 947
|
|
Jan 29, 2011 11:40:48 GMT
|
Another pm sent can collect asap if you can get back to me
|
|
Last Edit: Jan 29, 2011 11:47:48 GMT by v8ade
V8 on open headers at full throttle "Heaven"
Jaguar xf SportBrake rover 820 Turbo vitesse
|
|
|
|
Jan 29, 2011 12:09:35 GMT
|
Pm sent ref bonnet and can collect asap Cheers Iain
|
|
|
|
|
|
|
Pictures updated as I noticed there were a lot of broken links.
More stuff coming today.
|
|
|
|
|