I tidied up the workshop today and have a load of stuff which I have no use for. So here they are.
Toyosport Front Mount Intercooler. This item is brand new and unused, I am currently running one in my daily and I am very pleased with it. Sadly I have no pipework for this cooler.
3" deep
3" inlets
30" wide from inlet to inlet
28" wide across the top part of the cooler
12" from top to bottom
£150 ono
Large Exhaust system.
This exhaust system came off of a Type R accord although I belive it will fit other Hondas, Preludes, Civics maybe. It has a 2.25" bore with no boxes, the back box is a 4.5" angled exit.
£100 ono
Decat
This came from the above exhaust system, it has a 3 bolt flange one end and a slip fit end on the other, I have the fitting for this which again is a 3 bolt flange. The slip end alows for the decat to be adjusted length ways.
£45 ono
Momo Bucket seat
This came out of a track car I had in. The seat is FIA approved but is out of date but will still comply with some competitive rules. The seat does have some wear to the bolster but this is just in the protective gusset and has not touched the seat fabric below.
The seat has been in my workshop so is pretty dusty.
£60 postage avalible on request
OBX HT leads.
These came off of my Type R and were pretty new. they are a 6 core 1.3mm lead.
£25
Willians Harness'
I have a pair of these. 4 point straps and a aircraft style buckle. they have webbing on them which brings them out to 3" in places.
£40 each
Any questions, please fire away.
Toyosport Front Mount Intercooler. This item is brand new and unused, I am currently running one in my daily and I am very pleased with it. Sadly I have no pipework for this cooler.
3" deep
3" inlets
30" wide from inlet to inlet
28" wide across the top part of the cooler
12" from top to bottom
£150 ono
Large Exhaust system.
This exhaust system came off of a Type R accord although I belive it will fit other Hondas, Preludes, Civics maybe. It has a 2.25" bore with no boxes, the back box is a 4.5" angled exit.
£100 ono
Decat
This came from the above exhaust system, it has a 3 bolt flange one end and a slip fit end on the other, I have the fitting for this which again is a 3 bolt flange. The slip end alows for the decat to be adjusted length ways.
£45 ono
Momo Bucket seat
This came out of a track car I had in. The seat is FIA approved but is out of date but will still comply with some competitive rules. The seat does have some wear to the bolster but this is just in the protective gusset and has not touched the seat fabric below.
The seat has been in my workshop so is pretty dusty.
£60 postage avalible on request
OBX HT leads.
These came off of my Type R and were pretty new. they are a 6 core 1.3mm lead.
£25
Willians Harness'
I have a pair of these. 4 point straps and a aircraft style buckle. they have webbing on them which brings them out to 3" in places.
£40 each
Any questions, please fire away.