|
|
|
|
|
|
Hope someone can shed some light on this. The wipers on my golf do not "park" at bottom of screen and only work on one setting. Any ideas on how to rectify?
Also, is that issue an mot fail?
Thanks
|
| |
|
|
|
|
|
|
|
|
Check all your wiring connections and your earth. At least on older VWs, the park function and speed settings all had separate wires, so those wires may not be flowing enough current.
|
| |
|
|
|
|
|
|
|
|
On older stuff there is a parking ring on the motor - this is basically an electrical contact with a small gap at the 'park' position. This is usually powered on the switched + circuit of the car, allowing the wipers to complete their sweep cycle before they stop.
As waveman suggests, check the wiring; but if that checks out, you may find the ring itself is corroded or broken inside - can easily be cleaned, or soldered up.
Joe
|
| |
|
|
|
|
|
|
|
|
Thanks guys! Will check that out. Car has been sat a fair few months, so dodgy connection/corrosion is a distinct possibility!
|
| |
|
|
