Hey guys, bought this with the intention of racing, but I need to sell to fund a trip to Paris
SCRT10 kit with the following upgrades
- Lightweight steel spur gear
- CNC ackermann plate
- CNC hingepin holders
- Front Universal joint shafts
- Big bore hong nor shocks on the rear
- Traxxas Velineon 3500kv motor (barely used)
- Hobbyking 100A ESC (had 8 packs through it)
- Turnigy 5000maH 40C 2S pack (converted from 4S, used about 20 times or so)
- Towerpro MG946R steering servo
- Associated 1/8" to 5mm pinion adaptor (used once)
- Slash wheels/tyres
- Spare set of wheels with nearly new Schumacher minipins
- Proline Chevy body for Revo 3.3/Savage/LST (used twice on road, bit of road rash)
The pinion gear could do with replacing, it's only 12T so the car is undergeared (top speed isnt all that) anyway but the teeth are a bit worn, you can always turn it around and use the other side of it too , needs a 15T pinion really on 2s, never tried it on 3S but it should be very rapid!!. ESC is 4S capable too
Also comes with a small packet of spares and original box.
Please note that the front shock absorbers and receiver are NOT included, if needed i can fit a standard 27MHz transmitter for £10 and maybe even find some shock absorbers and a basic lipo charger to make it a truly ready to run package.
Pictures
As it is it costs me about £300 all in, need to get shot of it ASAP so £150 posted takes it, buyer to pay fees.
Alternatively cash on collection for £140 and i'll throw in transmitter/receiver, lipo charger etc. for free.
SCRT10 kit with the following upgrades
- Lightweight steel spur gear
- CNC ackermann plate
- CNC hingepin holders
- Front Universal joint shafts
- Big bore hong nor shocks on the rear
- Traxxas Velineon 3500kv motor (barely used)
- Hobbyking 100A ESC (had 8 packs through it)
- Turnigy 5000maH 40C 2S pack (converted from 4S, used about 20 times or so)
- Towerpro MG946R steering servo
- Associated 1/8" to 5mm pinion adaptor (used once)
- Slash wheels/tyres
- Spare set of wheels with nearly new Schumacher minipins
- Proline Chevy body for Revo 3.3/Savage/LST (used twice on road, bit of road rash)
The pinion gear could do with replacing, it's only 12T so the car is undergeared (top speed isnt all that) anyway but the teeth are a bit worn, you can always turn it around and use the other side of it too , needs a 15T pinion really on 2s, never tried it on 3S but it should be very rapid!!. ESC is 4S capable too
Also comes with a small packet of spares and original box.
Please note that the front shock absorbers and receiver are NOT included, if needed i can fit a standard 27MHz transmitter for £10 and maybe even find some shock absorbers and a basic lipo charger to make it a truly ready to run package.
Pictures
As it is it costs me about £300 all in, need to get shot of it ASAP so £150 posted takes it, buyer to pay fees.
Alternatively cash on collection for £140 and i'll throw in transmitter/receiver, lipo charger etc. for free.
