breng
Part of things
Posts: 223
|
|
|
|
|
Will a 5 spoke mondeo alloy (similar to the escort cosworth type) fit on a mkIV 51 plate fiesta?
If so what nuts will I need? Are spacers required?
|
| |
|
|
ChasR
RR Helper
motivation
Posts: 10,191
Club RR Member Number: 170
|
Mondeo 5 spokesChasR
@chasr
Club Retro Rides Member 170
|
|
|
|
AFAIK, yes they should. PCB, and centre bore should be the same.
You *may* need spacers but IIRC the Mondeos ran a little more offset than the Fezzas did. I shall have to research this more. You will need Ford alloy wheel nuts with the dished washer on them, assuming you are on steels for now. You can pick the nuts up cheap enough from eBay. New from Ford they are silly money!
|
| |
|
|
|
|
|
|
|
|
And lower profile tyres as they are 16s
|
| |
|
|
ChasR
RR Helper
motivation
Posts: 10,191
Club RR Member Number: 170
|
Mondeo 5 spokesChasR
@chasr
Club Retro Rides Member 170
|
|
|
|
I forgot about that! Only the Escort GTi had the 15" versions. On the 15" versions the tyres are silly cheap. On the 16s they are quite expensive and even going slightly bigger can result in tyre and arch action potentially.
|
| |
|
|
|
|
|
|
|
|
Forgot I think it's 45 profile tyres with 16s
|
| |
|
|
