Peugeot Dashboard Removal

[Carsie]

Wonder if there are any genius' on here tonight?

Having problems removing dashboard from Partner/Berlingo van. Ubolted and unscrewed as much as I can but the b***er still seems to be attached - logic and help required asap pls

Thank you

[bigfella2]

On some cars the dash is also screwed through the bulkhead, so there may be screws or bolts in the scuttle area of the bulkhead. Just an idea.

[Rich]

Pretty sure there are bolts or studs back through the scuttle area into the cabin. Not done one for a while but I'm certain there is something like that.

[welshpug]

if its like the 306 then there's a multiplug under the wiper motor which needs the middle bolt removing to separate the two halves, don't need to remove the nuts securing the front loom to the bulkhead.

there's a bolt at the bottom of the dash into the top of the exhaust tunnel too, one behind the headunit into the heater box itself, and a pair of bolts in the bottom corners, and the ones in the scuttle as mentioned.

[Carsie]

Ah thanks Guys! - I'd got the wiper motor/scuttle nuts but I'll go hunting for the others

[Carsie]

A post trims holding it back doh!

Thanks guys - heater matrix tomorrow - stiff whiskey tonight Have a good one

[Rich]

Oct 24, 2014 19:02:32 GMT Carsie said:

A post trims holding it back doh!

Thanks guys - heater matrix tomorrow - stiff whiskey tonight Have a good one

Thought you'd be doing a matrix. It's alright once the dash is out

[welshpug]

apart from that bloody grommet...

[chairchild]