E28 banded steels advice

[tomcantfly]

So i recently purchased an e28, first bmw I've owned, been new to them, could all answers be typed slowly please?

thinking of getting some banded steels, I've saw a few imagines on Google and other forums (I'm not a member of just been nosey) and I quite like the look.

So here's the questions....what steels, other then bmws would fit? What " wheels are best and what would the limits I could band them too be, with regards to, one fitting properly and two, actually looking good?

Any advice, pics and dare I say it....opinions welcome

[stevieclj]

The new T5 wheels will fit with a bit of fettling, as they're 5x120.

Have a look at wheel-fitment.com

[tomcantfly]

I was told the t4 fit aswell, neither of them are on the list on that site but I had a read and I'm probably more confused now than when I started haha I'm complete noob when it comes to wheels. I've never fitted anything other than stock wheels on a car. I don't even understand the 8.5j 22et stuff

[stevieclj]

T4 won't fit, as they're 5x112.

T5's and T6's share the same stud pattern, but probably not centre bore so either bore them out, or fit spigot rings.

New Lexus LS460/600, but again, down to centre bore issues possibly.
Honda Legend/Ridgeline, again, centre bore issues possibly.
Tesla Model S, centre bore issues possibly.
Pontiac G8, possible centre bore issues again.

Back to the VW camp again, theres the Amarok and Touareg.

The list is, quite honestly, endless.

If you search by PCD, 72.5mm Centre Bore is your friend but anything can be made to fit >>> www.wheel-fitment.com/PCD/5x120/

[tomcantfly]

Thanks for your help, I appreciate it, this something I'm going to read up on before I buy anything, thanks again