Rust proofing recommendation

spartacus Part of things Posts: 256	Rust proofing recommendation spartacus @spartacus
	Feb 16, 2015 7:43:12 GMT Select Post Deselect Post Link to Post Back to Top
	In the next couple of weeks I'll be fitting new dampers and springs to my car. While the struts are out I'd like to get some paint on the inside of the turrets and around the inside of the arches. I had a look yesterday, what's there is mainly sound, just a few small localised areas of surface rust, (I hope!). I'd like to be able to wire brush down any loose rust and just paint something on that's hard wearing, preferably something that dries quickly, any recommendations? Thanks in advance.


	Reply Quote

maybachman South East Posts: 232	Rust proofing recommendation maybachman @maybachman
	Feb 20, 2015 21:13:15 GMT Select Post Deselect Post Link to Post Back to Top
	i always use Bilt Hamber stuff
	I would be rich if i had not spent so much money on Cars and fast women...oh, i did waste some of it as well!

	Reply Quote

taurus Posted a lot Posts: 1,084	Rust proofing recommendation taurus @taurus
	Feb 20, 2015 22:13:27 GMT Select Post Deselect Post Link to Post Back to Top
	I'd treat with a good quality rust treatment (the aforesaid BH or Dinitrol), then I use Ronseal No Rust. I use it on my boat trailers and it's the longest lasting I have found. It can straight over the rust treatment and dries quickly.
	retrorides.proboards.com/thread/139540/1972-vauxhall-viva

	Reply Quote

dallow Part of things Posts: 253	Rust proofing recommendation dallow @dallow
	Mar 1, 2015 17:10:53 GMT Select Post Deselect Post Link to Post Back to Top
	I'd use an epoxy primer. Hardwearing and waterproof.


	Reply Quote