A friend of mine who doesn't tend to do online forums has asked me to sell a couple of tools for him. I sugested we try here first rather than go straight for eBay and lose a load in fees.
So first up we have a cylinder bore guage. This an analog style with a full set of extensions and nestled in a nice padded wooden box. One or two of the extension pieces have some very slight surface rust on them but I'm sure it would clean/rub off with a bit of scotchbrite. It wouldn't affect function in any way though. NOW SOLD
Next up we have a brand new Sykes Pickavant Coolant system pressure tester. This kit has a thermometer supplied so temperature testing can be carried out as well as leak detection of the whole system. It appears to be missing the bayonet style cap adaptor however I'm unsure if this was an option that wasn't included and therefore never there to start with. £85
Now we have a Fluke 787 Process meter. From my quick bit of online research this appears to be a pretty tasty bit of kit (read expensive). It is both a multimeter and a process meter. The kit comes with 5 sets of leads all housed in a Fluke C100 plastic case (bought seperately). Also included is Fluke 80TK Thermocouple module and leads. This allows the meter to be turned into a digital thermometer and can read temperatures in the range of -50 to 1000 degrees. £350
Lastly for sale is a box of mortice chisels. New and unused. I think these came from Screwfix. Not car related but they may be useful to someone NOW SOLD
So first up we have a cylinder bore guage. This an analog style with a full set of extensions and nestled in a nice padded wooden box. One or two of the extension pieces have some very slight surface rust on them but I'm sure it would clean/rub off with a bit of scotchbrite. It wouldn't affect function in any way though. NOW SOLD
Next up we have a brand new Sykes Pickavant Coolant system pressure tester. This kit has a thermometer supplied so temperature testing can be carried out as well as leak detection of the whole system. It appears to be missing the bayonet style cap adaptor however I'm unsure if this was an option that wasn't included and therefore never there to start with. £85
Now we have a Fluke 787 Process meter. From my quick bit of online research this appears to be a pretty tasty bit of kit (read expensive). It is both a multimeter and a process meter. The kit comes with 5 sets of leads all housed in a Fluke C100 plastic case (bought seperately). Also included is Fluke 80TK Thermocouple module and leads. This allows the meter to be turned into a digital thermometer and can read temperatures in the range of -50 to 1000 degrees. £350
Lastly for sale is a box of mortice chisels. New and unused. I think these came from Screwfix. Not car related but they may be useful to someone NOW SOLD
