cjhillman
Posted a lot
1979 Capri (Rolling Project) 1985 Escort mk3 (Daily)
Posts: 1,588
|
|
Dec 24, 2015 16:27:48 GMT
|
|
What's the best or good stuff to stick a badge on to a car with? I don't want it to be on forever or mark the paint work as I'll want it back when I sell the car... But I want it to stay on lol
|
| |
|
|
|
|
|
Dec 24, 2015 17:08:01 GMT
|
|
Use double sided foam pads as OE badges on cars.
|
| |
|
|
bortaf
Posted a lot
Posts: 4,549
|
|
Dec 25, 2015 20:34:40 GMT
|
3m badge tape is about as good as it gets, warm the badge, pannel and tape with a hair dryer before application  |
| |
R.I.P photobucket
|
|
antni
Part of things
Posts: 423
|
|
Dec 25, 2015 21:32:31 GMT
|
|
Need to fix my Audi badge back on my coupe being the rings it only had a small surface area to fix so I need to find something strong! Will see if i can find some 3m pads. I use janser double sided tape at work and its stupidly strong but only in the warm and dry as I found out with a lost number plate.
|
| |
|
|
|
|
|
Dec 25, 2015 21:54:01 GMT
|
|
Definitely 3M badge tape.
Stick it to the badge, then lay it with the badge facing up and trim around with a sharp craft knife. Then stick it to the car.
Give the paintwork a good clean and polish before you put the badges back on.
|
| |
|
|
