|
|
|
|
|
|
Hello guys just need some help, I am going to waxoyl my car and was going to be using a garden pressure sprayer to put the waxoyl in and spray it, but it seems to be quite thick I read somewhere that you can thin it down by using some white spirit as it will evaporate once it's on the car and also to put the sprayer in to a bucket of hot water to keep it warm and thinned, so my question is that are these ways ok to use or does anyone use any other method to keep the waxoyl thinned enough to get it flowing right out the pressure sprayer, all help appreciated in advance
|
| |
|
|
|
|
|
|
|
|
Just pop it in a bucket of hot water for half and hour and it will thin out. That's the accepted way if doing it. Might even say so on th instructions
|
| |
|
|
|
|
|
|
|
|
I used white spirt. It’s left my car smelling and it’s been like that for 10 years, and it doesn’t go away.
I’d warm it in a hot bucket and try and do it on a really hot day.
|
| |
1994 BMW 525i touring
2004 BMW Z4 sorn and broken
1977 Ford Escort
1982 Ford Capri getting restored
1999 Mazda B2500 daily driver.
|
|
|
|
|
|
|
Bucket of hot water is the best it gets You don't want to thin it out any other way just in case it effects the way it works If you have access to a compressor your better off using a wax cavity gun You can get the wax right in all the nooks and crannies  |
| |
1992 240 Volvo T8
1955 Cadillac
1994 BMW E34 M5 (now sold )
1999 BMW E36 sport touring x2
1967 Hillman imp Californian "rally spec"
1971 VW bay window (work in progress)
1999 Mazda 323F
1987 Jaguar XJ12
All current
|
|
|
|
|
|
|
|
Thanks guys I will warm it in water to thin it, and apply It that way thanks again all help appricated
|
| |
|
|
