|
|
|
Apr 12, 2020 18:12:56 GMT
|
Hello guys needed some help I recently painted my sunroof and unfortunately I had It up against something and now it's has marked the clear coat is there any way I could save this or is it a case if sanding it all down and starting again I have attached some pictures of the marks if anyone can help much appreciated in advance   |
| |
|
|
|
|
|
Apr 12, 2020 18:14:29 GMT
|
|
Should have mentioned I am still waiting for it to dry so I can wet sand it to remove the orange peel thank you
|
| |
|
|
dazcapri
North East
Enter your message here...
Posts: 1,056
|
|
Apr 12, 2020 18:56:11 GMT
|
|
Calling @grumpynorthener
|
| |
Mk3 Capri LS
|
|
|
|
|
Apr 12, 2020 21:34:04 GMT
|
|
All depends upon how deep the damage is - you probably stand a good chance of flatting & polishing much / maybe it all out but you also stand the possibility of flatting through the lacquer / clear coat too - concentrate on the damage area first and see where you get to - flat with a block rather than by hand to prevent digging in - try 2000 first and add a dab of soap to your wet & dry paper - used with plenty of water - if the damage is deep you try could 1500's but with great care - you largest problem is going to be avoiding polishing through the clear coat - post up any further questions you may have and I will do my best to get back to you - Chris
|
| |
|
|
|
|
|
Apr 13, 2020 22:59:09 GMT
|
|
Thanks Chris I did give it 4 coats of clear so I'm hoping it will be enough to cut back and polish I had it leanimg on cloth so the pattern of the cloth had imprinted through the clear I will get some 1500 paper tommorw hopefully and I will post up any issues much appreciated for your help
|
| |
|
|
