mr
Posted a lot
Posts: 1,527
|
|
Oct 18, 2023 13:40:47 GMT
|
My sons girlfriend has bought a better bootlid for her k11. It's bare and needs everything swapping but it seems reasonably easy. Just these two clips that won't come off to allow me to drop the roof lining. Any ideas?  |
| |
Got the car from 105 bhp at the crank to 152 at the wheels.nitrous going on next.....if it ain't broke,keep bolting on go faster parts until it is........ www.fordgranadaclubuk.freefo.de |
|
|
|
|
Oct 18, 2023 15:43:21 GMT
|
|
First, disconnect all the wiring inside the boot lid, and pull it through to the grommet you show.
Undo the two bolts holding the hinge to the boot lid.
Then do the same on the other side.
|
| |
|
|
mr
Posted a lot
Posts: 1,527
|
|
Oct 18, 2023 16:41:42 GMT
|
|
Ooohhh, now that makes a bunch more sense.just assumed as the new bootlid had the hinges still on that I needed to unbolt them via the single roof panel bolts🤦🏻♂️thanks mate
|
| |
Got the car from 105 bhp at the crank to 152 at the wheels.nitrous going on next.....if it ain't broke,keep bolting on go faster parts until it is........ www.fordgranadaclubuk.freefo.de |
|
mr
Posted a lot
Posts: 1,527
|
|
|
|
|
All swapped over, thanks for the info 👍
|
| |
Got the car from 105 bhp at the crank to 152 at the wheels.nitrous going on next.....if it ain't broke,keep bolting on go faster parts until it is........ www.fordgranadaclubuk.freefo.de |
|
