15" x 7" steel Weller wheels 4x100PCD

[pimpdriver]

Hi,

Anybody interested in a set of 4 steel Weller wheels? 15inch diameter by 7 inch wide. Don't know the offset but they do fit on the Audi 80 in the pic (normally use ET45 wheels) but the arches are quite close.

£150 the set.
email:
[e-mail] or ring/text 07971 661221

Cheers,
Steve

[iRocco]

If they're off an Audi then the PCD will be 4x108 not 4x100....which is a real shame because they'd be ideal for the Rocco

[rainking]

depends how old the audi is... my old '83 80 GL was 4x100

[ats]

looking @ the pic... it a C plate..

[iRocco]

Does that mean thesere 4x100 then??

[reanimation]

Well if they are 4x100 i may well be seiously interested. just gotta do some offset homework!

[pimpdriver]

1380checkm8 said:

If they're off an Audi then the PCD will be 4x108 not 4x100....which is a real shame because they'd be ideal for the Rocco

They ARE 4 x 100 as I said. The 4 pot Audis of that vintage are 4 x 100. 5 pot of same vintage are 4 x 108. Early 5 pot stuff (1982 ish) is 4 x 100.

If you want to play the whole Audi PCD game, A3s are 5x100, A4, A6, A8 etc and late 100/A6 is 5x112 which will fit on a VW T25 van if you machine out the centre on the front, use longer bolts and get rid of the drum bolt on the rear and use spacers.

Wheels are in Bristol. Will try and measure offset. I rang Weller today but got no reply.

Who wants them then? IRocco or Reanimation.

Steve

[reanimation]

Interested if i rocco isn't

[Thrasher]

ditto . v interested.

[pimpdriver]

Hello,

1st on queue is reanimation. Provided offset, bore etc are OK for you Mark (once I get round to measuring them).
2nd in queue is Thrasher.
IRocco doesn't know his from his elbow when it comes to Audi PCDs so back of the class!

[pimpdriver]

If this happens when I type a r s e, what happens when I type curse word?

[iRocco]

pimpdriver said:

Hello,

1st on queue is reanimation. Provided offset, bore etc are OK for you Mark (once I get round to measuring them).
2nd in queue is Thrasher.
IRocco doesn't know his from his elbow when it comes to Audi PCDs so back of the class!

pimpdriver said:

If this happens when I type a r s e, what happens when I type gobshite?

Not sure - but you sure know how to 'win friend's and influence people' - especially moderators!

[pimpdriver]

1380checkm8 said:

Not sure - but you sure know how to 'win friend's and influence people' - especially moderators!

I wouldn't care if you were the Prime Minister, your status doesn't affect the way I talk or type. Should it?

If you don't know what you're talking about with PCDs you could have lost me a sale. Someone reading it might have got to the first reply, and read "oh even though the advert says 4x100 and the poster knows what hes on about, someone else says they are 4x108, therefore they won't fit!"

if you wanted to buy them, trust the advert and say "I'm interested, the ad says they are 4x100, they might fit the Rocco", not try and make me look like a fool!!!

Do you want to be third in the queue? I am a nice guy really.

Steve

[iRocco]

pimpdriver said:

1380checkm8 said:

Not sure - but you sure know how to 'win friend's and influence people' - especially moderators!

I wouldn't care if you were the Prime Minister, your status doesn't affect the way I talk or type. Should it?

If you don't know what you're talking about with PCDs you could have lost me a sale. Someone reading it might have got to the first reply, and read "oh even though the advert says 4x100 and the poster knows what hes on about, someone else says they are 4x108, therefore they won't fit!"

if you wanted to buy them, trust the advert and say "I'm interested, the ad says they are 4x100, they might fit the Rocco", not try and make me look like a fool!!!

Do you want to be third in the queue? I am a nice guy really.

Steve

Hey - I hold my hands up I was wrong.....but there are / were better ways in which to respond.