Hi Guys i Know its a Bit late but just thought i would post up what i got up to this weekend on the GT.
Ever Since the I had problems with the DCOE on the GT (not roadster) I found that the exhaust got well a bit odd in tone, this was cus the fuel was burning down the exhaust and was putting stress on the section where the Join of the new Manifold to the Exhaust pipe met, After jacking the car up i found this, a small hole on the join next to the pressure box.
After a Bit of a Clean up and a few welds here and there she was sorted and i thought i would spend the time cleaning up the whole pipe and spraying it BLACK of course.
Then onto a Job that Has not been done and should of just because i had the materials. By this i mean the Cold air Feed to the Carb, Basically the pipework was stopped at the front Radiator Mount so i decided to Cut a Nice Hole to fit the pipe right to the Carb,
Before
After
And now all Piped in and looking better
Thought i would also Submit one of the front end, dunno why ;D
So most of the little jobs have been done, Thought i would be required to put some underseal on the frame but i was wrong its a clean a whistle.
PS sorry for the size guys did not get chance to make them any smaller so Sorry again
Ever Since the I had problems with the DCOE on the GT (not roadster) I found that the exhaust got well a bit odd in tone, this was cus the fuel was burning down the exhaust and was putting stress on the section where the Join of the new Manifold to the Exhaust pipe met, After jacking the car up i found this, a small hole on the join next to the pressure box.
After a Bit of a Clean up and a few welds here and there she was sorted and i thought i would spend the time cleaning up the whole pipe and spraying it BLACK of course.
Then onto a Job that Has not been done and should of just because i had the materials. By this i mean the Cold air Feed to the Carb, Basically the pipework was stopped at the front Radiator Mount so i decided to Cut a Nice Hole to fit the pipe right to the Carb,
Before
After
And now all Piped in and looking better
Thought i would also Submit one of the front end, dunno why ;D
So most of the little jobs have been done, Thought i would be required to put some underseal on the frame but i was wrong its a clean a whistle.
PS sorry for the size guys did not get chance to make them any smaller so Sorry again
