Anybody make there own beaded panels?

dubwarrior2 Part of things "Open up, its the filth" Posts: 576	Anybody make there own beaded panels?dubwarrior2 @dubwarrior2
	Apr 11, 2009 23:14:32 GMT Select Post Deselect Post Link to Post Back to Top
	Has anybody made their own bead roller or got an idea of how to make one? I don't want to fork out load sof money for a pro model as I will only use it several times. I want to be able to put some 1 inch wide beads into some steel panels running across the centre. Similar to this panel in between the rear wheel tubs - I really don't want to be knocking them out with a hammer and dolly as they will look aweful.
	Volvo powered VW T4

	Reply Quote

gn3dr Part of things Posts: 391	Anybody make there own beaded panels?gn3dr @gn3dr
	Apr 11, 2009 23:48:13 GMT Select Post Deselect Post Link to Post Back to Top
	Get one of these cgi.ebay.co.uk/Deep-Bead-Swage-Roller-Joggler-Floor-pan-swager-7-rolls_W0QQitemZ110374331202QQcmdZViewItemQQptZLH_DefaultDomain_3?hash=item110374331202&_trksid=p3286.c0.m14&_trkparms=72%3A1688\|66%3A2\|65%3A12\|39%3A1\|240%3A1318 But you will need to weld a few bits into it to strenthen it up - do a search on the web for "modified harbour freight bead roller" or something similar and it should pop up loads of improved versions


	Reply Quote