Wheel ID please!

[Rich]

Anyone know what these are/who made them? And also, the likelyhood of them being 4X100

I know they are 13"..



Thanks,

Rich

[donttellhimpike]

i had some similar ,they were made by 'two gates, [staffs ] just as a matter of interest does the centre bore look small to you?

[Rich]

Center bore looks deciving I think as the bolt holes look bigger than they really are.

Gonna start looking into the name you gave me, thanks

Rich

[Mark16v]

from the looks i'd say they could be 4x98 (italian) fitment aswell...

[Rich]

Oct 6, 2009 21:24:12 GMT Mark16v said:

from the looks i'd say they could be 4x98 (italian) fitment aswell...

Hmm. Had a feeling the spokes had an italian look to them, if you know what I mean. Just can't seem to find anything that looks like these in terms of workign out what they are. The geezer says they came off a Golf cabby but I was sold 'mini' wheels before in 4X114.3

Rich

[dugong]

They look very like Vauxhall Cavalier Mk 2 CD alloys, although I doubt they were 13":



Ronal made the majority of the GM stuff. If they are you're in luck, 4 x100 PCD plus a FWD offset.

If I was to plump for an aftermarket manufacturer, I'd say MiM.

[hairnet]

ive seen those wheels on e30s and porsche 924

ronals or mim

[hairnet]

ive seen those wheels on e30s and porsche 924

ronals or mim

[ChasR]

I would have said Porsche 924 as well but I am fairly sure that they were either 14" or 15".

[Team Blitz]

You guys who are looking at a photo and making 98mm vs 100mm judgements are killing me. ;D

By my ruler, a 2mm dif on wheel pattern means each hole is exactly 1mm in/out from the other pattern's.

We ought to use your eyes instead of 250 million dollar spy satellite arrays!