Hello- I have for sale a 2.8 capri type 9 5 speed gearbox with a bellhousing to suit crossflow ...or a pinto. I have shortened the input shaft,found and fitted the appropriate bellhousing - it mates up to a crossflow nicely...but alas wasnt to fit my car (HB Viva) without serious mods to tunnel which I didnt want to do.
So its up for grabs.
It was rebuilt by previous owner and comes with a load of new and old spares- amongst which is a spare ist motion shaft if you want to convert it back to suit a V6 and bellhousing... the original bellhousing also included.
What will be needed is a standard seirra or other type 9 clutch release fork as 2.8 one wont allow release bearing to slide back far enough. Slightly different shape and I never bothered getting one once I realised it wasnt going to fit into my cars tunnel.
This box has much taller 1st gear which suits smaller lighter cars alot better than the lower gears of a standard type 9.
Not shown in photos but is included is the gearstick...with no knob..
£175
I'm in oxford.
phone 07776234772
alex
So its up for grabs.
It was rebuilt by previous owner and comes with a load of new and old spares- amongst which is a spare ist motion shaft if you want to convert it back to suit a V6 and bellhousing... the original bellhousing also included.
What will be needed is a standard seirra or other type 9 clutch release fork as 2.8 one wont allow release bearing to slide back far enough. Slightly different shape and I never bothered getting one once I realised it wasnt going to fit into my cars tunnel.
This box has much taller 1st gear which suits smaller lighter cars alot better than the lower gears of a standard type 9.
Not shown in photos but is included is the gearstick...with no knob..
£175
I'm in oxford.
phone 07776234772
alex