I have a pair of mk3 capri hubs that have been machined to accept 283mm mondeo v6 discs fitting over the front of the hub.I was going run these with granada cosworth front calipers which I can supply also. These would be best used with longer wheels stud which can be supplied too. These are similar to the conversion offered by capri sport.
I don't have any caliper mounting brackets as I never got round to making them before the car was sold. Discs will have to be bought as I only had one for sizing up the conversion but these are available from motor factors or ebay.
Looking for £50.00 + postage for everything. These are quite heavy so budget £10-£15 for postage
I also remember buying new wheel bearings for these but at the minute can't find them but if they turn up I will throw them in with the deal.
Cheers Barry
I don't have any caliper mounting brackets as I never got round to making them before the car was sold. Discs will have to be bought as I only had one for sizing up the conversion but these are available from motor factors or ebay.
Looking for £50.00 + postage for everything. These are quite heavy so budget £10-£15 for postage
I also remember buying new wheel bearings for these but at the minute can't find them but if they turn up I will throw them in with the deal.
Cheers Barry