weller 16" 4x108 pcd big offset..!swap 4 wheels

[B-8-D]

got a set of weller or weller type (edit they are weller..) (triangle cutout type)
in 16" diameter with a 6" width.. but a big offset around 35mm (positive?) offset ie outwards..
I'm guessing at that figure they measure at mount face to outer edge of rim lip 5"

they are painted in a horrible blue atm (sorry)
there is a few dings in the very edge of the rim lips but if I get time I will sort that no probs..

they are a bit thicker and heavyer than normal wellers.
will be great on old ford and different too..(nice flat face so would redrill easy!)
I don't want to post these so collection near bath in somerset..
want 80 quid for them..

will get some pics..
si

[benlg81]

would be interested in pics mate

[cobblers]

Ooh, very interested if you can supply some pics. I know you don't want to post, but I would have to send a courier to collect them..

[ExJarkle]

I'll have these if the guys above decide they don't want them.

[B-8-D]

I'm happy for the buyer to arrange a courior or try the new section on here for the collection/delivery....

here at last are some pics.. ive pictured the worst wheel.. this firstly is the rear as you can see the awful blue paint is only on the fronts but there is runs down the back....


from this pic you can make out the awsome offset..
and also at about 11 o'clock you can see a ding in the rim edge it really is just the edge and they run true.. I will sort this no probs..
this is the worst wheel..




this is the width it appears to be 6 1/4" wide..

5" from the mounting face to the extream outer rim lip:


and around a 67.5 to 68mm centerbore.

si
si

[J1MMY]

Holey smokes that is some dish!

Si, can you measure the mounting face to the edge of the inside lip and the width of the wheel from inside of lip to inside of lip (effectively where the tyres beads).

[stealthstylz]

Cobblers if you want em and if Si can bring them to A52 this weekend i'll bring em back up with me.

Matt

[B-8-D]

Feb 17, 2010 22:45:20 GMT J1MMY said:

Holey smokes that is some dish!

Si, can you measure the mounting face to the edge of the inside lip and the width of the wheel from inside of lip to inside of lip (effectively where the tyres beads).

j1mmy
backspace here:



and width is 6 1/4" here:

si

[B-8-D]

will swap for other wide wheels 13" 14" or 15" why??
pref steel any pcd..
si

[B-8-D]

these are still here people..
si

[cobblers]

I'll have to bow out of these. They look great, but real life has all of a sudden put a hold on wheel purchases (and food purchases... and phone bill payment...)

[J1MMY]

curse word these will never fit under the Audi's arches. Worth putting on Rods n Sods and OSF though.

[Steve]

Bump for a set of funky wheels :-)

[chappers]

You do realise you have painted the inside of these wheels and are running them the wrong way round.... lol
Great dish though.

[B-8-D]

Feb 23, 2010 10:39:09 GMT chappers said:

You do realise you have painted the inside of these wheels and are running them the wrong way round.... lol
Great dish though.

i wont take any responsibility for the painting sorry..
they are however a mighty large offset...
they are also on the dreaded bay of eeeeee
si