MG Metro Turbo and Mini Parts

[slater]

Left over from my Metro/Mini days

1 new turbo fuel pump £40
1 used turbo fuel pump £20
1 turbo fuel pressure regulator £25
1 turbo boost control ECU and bleed valve £10
1 T3 oil drain elbow (alloy part that bolts to the turbo) £10
1 T3 exhaust elbow £20
1 Turbo to plenum silicone hose - £5
1 1" slicone hose elbow used to fit dumpvalve - £5
1 T3 standard waste gate actuator £10
1 T3 turbo dismantled with damaged compressor wheel for spares (what do you need?) £10
1 Metro turbo standard oil cooler with hoses £20
1 Oil cooler approx 6" square fin area £15

Also

New old stock track rod ends (pair) to fit metro - £10
New old stock kuckle joints (pair) to fit metro - £10
EBC 'black' brake pads to fit metro - £5
Standard brakepads to fit metro - £5
Used hydrogas suspension units - £5 each
Set of standard wheels/tyres (band em!) - free to collect
also a big box of other misc spares - free to collect

Pair of brake calipers to fit metro turbo (rare vented disc type) probably need recon - £20

Mini bonnet - £10
Mini radiator - £10
Roofrack sutible for mini or whatever!- £20

full 998cc a+ engines, 12g940 cylinder heads, pre A+ block and cranks gearbox/clutch casings/parts plus many other a-series parts avalible so please ask.

all prices are ono, and do not include postage

Everything is located in Sudbury, Suffolk. If you are serious please PM or email me at [e-mail] as I'm pretty bad at checking my forsale threads!

[disasterbus]

Jan 8, 2011 11:42:07 GMT slater said:

Left over from my Metro/Mini days

Mini bonnet - £10

Roofrack sutible for mini or whatever!- £20

Interested in these - have you got pics so I can get an idea of condition etc., and are you going to the awards nught at the Ace Cafe next week?

Thanks

[slater]

Ok, i don't have a pic of the bonnet right now but its basicly a mk3 bonnet that has had the grille lip removed (to use a mk1 gille), the internal seem cut back slightly to clear a radiator and i think its had the catch bracket removed as it was going to be fitted on pins. Its not visible from outside the bonnet and i guess theres nothign really stopping you puttin a new lip/catch on if you want to use it with a mk3 grille etc.. Otherwise its spot on, no rust or anything..


The roof rack is a generic adjustible type, had it on the mini but should fit anything really. Its been painted silver reently so is quite clean.. clamps into the roof gutters.

[apbellamy]

Have put you a link on metro owners club forum.

[rusty998]

calipers and pads for me please

[slater]

Jan 11, 2011 17:59:46 GMT apbellamy said:

Have put you a link on metro owners club forum.

Not yet! can cross post if you like..

Jan 12, 2011 18:00:10 GMT rusty998 said:

calipers and pads for me please

Both sets of pads or just the one? PM me!

[apbellamy]

Jan 12, 2011 21:05:34 GMT slater said:

Jan 11, 2011 17:59:46 GMT apbellamy said:

Have put you a link on metro owners club forum.

Not yet! can cross post if you like..

Just a link to this post.

[rusty998]

any chance of some pictures of the calipers at all ?

[will1602]

I'll have that roof rack if it's not yet gone. PM sent too.

[ian2000t]

No Turbo HIF6 or plenum?