Hi Guys,
I've been looking into the option of doing an engine conversion on my project. The current engine has had a rebuild but is complicated and full of old technology. I would ideally want to swap with something like a ca18det because I could buy a donor car reasonably cheaply so would have all the required parts.
I'm basically looking for any info/ guidelines or pointers when carrying out a conversion on a RWD vehicle. Things like lining the engine up with the diff, what angles things should be at, the methods people use to make the mounts etc.
I have done some basic searches but not found anything comprehensive. If anyone could point me in the direction of a good information source I would really appreciate it.
Thanks.
I've been looking into the option of doing an engine conversion on my project. The current engine has had a rebuild but is complicated and full of old technology. I would ideally want to swap with something like a ca18det because I could buy a donor car reasonably cheaply so would have all the required parts.
I'm basically looking for any info/ guidelines or pointers when carrying out a conversion on a RWD vehicle. Things like lining the engine up with the diff, what angles things should be at, the methods people use to make the mounts etc.
I have done some basic searches but not found anything comprehensive. If anyone could point me in the direction of a good information source I would really appreciate it.
Thanks.