|
|
|
|
|
|
hi there, sorry if this is been covered before but ive been searching around but i cant find what I'm looking for exactly, and didnt find much i understud so in laymen terms would be nice lol,
anyway ive got a hydro handbrake setup comeing for my track car (volvo 360 2.3l turbo) but i have no idea how to plumb it in, just wonder if anyone could help and pics on 360 would be healpfull,
cheers
|
| |
|
|
|
|
|
|
|
|
|
|
what layout are the brake pipes in? front-rear or diagonally split?
does it have a brake compensator anywhere?
a typical HH braking circuit goes -
M-C - Bias valve - HH - tee piece - rear wheel cylinders/calipers
and the front brakes feed off another port on the M-C to a tee piece, or if a 3 port MC just feed both front brakes from the same opposing pair, not the diagonal pair.
|
| |
|
|
mat91
Part of things
Posts: 399
|
|
|
|
|
dude the pipe going to the rear brake plumb into that job done
and when bleeding like normal but crack nipple press foot brake then pull hand brake then close bleed nipple repeat till done
i would also put a tee piece into the rear axle so it doesnt go throu the o/s first and just put a bleed nipple in that side like the other
|
| |
Last Edit: Apr 5, 2012 19:45:58 GMT by mat91
The stupid is everywhere |
|
|
|
|
|
|
|
cheers for your help guys, I'm affraid i don't know the setup, cheers mat, gonnaget my mate who i was at buxton with to give me a hand fitting it
cheers
|
| |
|
|
