usning 2 part rad flush...

slammage Posted a lot Posts: 2,371	usning 2 part rad flush...slammage @slammage
	May 11, 2012 21:56:05 GMT Select Post Deselect Post Link to Post Back to Top
	doing this on the corsair really getting my teeth into it the system does need flushing out. i bought this holts radflush 2 parts but has anyone used this? seems a bit odd using hot and cold water constantly..would this not mess the headgasket up or am i being a tard? any tips on using this? as i have already flushed the complete engine/rad out with water so halfway there just need to get to the heater way and engine block as there is still orange/brown jizz in it i want out cheers guys


	Reply Quote

jrevillug Posted a lot Posts: 3,520	usning 2 part rad flush...jrevillug @jrevillug
	May 11, 2012 22:02:59 GMT Select Post Deselect Post Link to Post Back to Top
	Don't know what the instructions are, but alternating warm and cold water (from the tap) shouldn't cause trouble. The real problem is putting stone cold water into a very hot engine - which can crack the block. As long as it's not telling you to drop the hot coolant out after a run and stick a hose into the engine immediately it'll be fine.
	Caution: As the buoys marking the shoals are often out of position, mariners are cautioned to be on their guard when navigating these shores 75 Imp 72 Clan - What? An update? Never!

	Reply Quote

slammage Posted a lot Posts: 2,371	usning 2 part rad flush...slammage @slammage
	May 11, 2012 22:13:28 GMT Select Post Deselect Post Link to Post Back to Top
	ok thanks for that mate as i thought, insturctions arnt that well detailed but as i thought it will be a day long thing to properly flush out the whole system and refill with coolant... tomorrows job on my birthday.nice lol.


	Reply Quote