Info required on retro fitting rear seat belts to a Magnum

[meltdown]

Anyone done this or know of somewhere I can get info on such an activity?

I've trawled Google and can't find anything specific.

Cheers in advance
Nick

[davemnw]

The HC range has mounts for 3-point belts, all filled with plastic plugs. Upper ones are about half way down the C-post and you should be able to find them by gently pressing on the headlining material. Centre ones are under the seat base, where the tunnel disappears into the boot floor area. There should also be a mount in each rear wheelarch - a couple of inches up from the floor and roughly middle of the arch, but many (most?) cars will have rusted here because muck collects around the reinforcing panel. So don't be surprised if the mount has been cut out or plated over.   For the belts themselves, have a look at www.securon.co.uk

[meltdown]

Fantastic thanks for that davemnw