820
South East
Posts: 793
|
|
|
|
I am struggling to find a A/C gas bottle tap round handle, looking for something like in the picture below, this is the wrong size but I cant find anything. Do they have a name? or where might I find one? Square center hole 7.25mm / 0.285"  While I am at it, what is the name for the holes pushed through a panel with a lip as in this picture?
Thanks in advance
Jim
|
| |
|
|
brachunky
Scotland
Posts: 1,339 
Club RR Member Number: 72
|
|
|
|
|
don't know about the handle but the holes in the lower image are called dimple dyes
|
| |
|
|
820
South East
Posts: 793
|
|
|
|
don't know about the handle but the holes in the lower image are called dimple dyes Brilliant, Dimple dyes opened up a whole world of tools and info on google, just what I needed, thanks |
| |
|
|
|
|
|
|
|
I am struggling to find a A/C gas bottle tap round handle, looking for something like in the picture below, this is the wrong size but I cant find anything. Do they have a name? or where might I find one? Square center hole 7.25mm / 0.285" Thanks in advance
Jim
It might be worth paying a visit to your nearest diy centre and looking at the GATE VALVES in the plumbing section. The only problem, if you can find a compatible handle you'll almost certainly need to buy the whole valve that it's attached to. |
| |
Last Edit: Aug 4, 2018 17:06:32 GMT by MkX
|
|
|
|
820
South East
Posts: 793
|
|
|
|
|
Apologies for slow reply.
Brilliant again, thanks MkX and skylinedave, really useful info. Swaged holes was the term I knew I used before.
Yes might have to buy a whole valve but they are not to expensive, now I know how to find them will be easier.
Thanks again really appreciate your help.
|
| |
|
|
