elfman
Part of things
Posts: 394
|
|
Sept 30, 2020 9:44:37 GMT
|
Any idea where I can get a pair of Anti Roll Bar blades ? Second hand will probably be fine, roughly 200mm in length.  |
| |
|
|
|
|
|
Sept 30, 2020 14:33:03 GMT
|
|
|
| |
|
|
elfman
Part of things
Posts: 394
|
|
Sept 30, 2020 16:24:44 GMT
|
|
Cheers, yes i have seen these but wondered if there are any others around or second hand as no kit will fit.
£100 for one blade ! if that's all I can find then so be it but they do seem on the pricey side.
Its for a Special Saloon car..
|
| |
|
|
elfman
Part of things
Posts: 394
|
|
Oct 30, 2020 10:43:57 GMT
|
|
Still cant get these sorted, Kit Car people cant give me the measurements I need at the moment so still looking..
|
| |
|
|
|
|
|
Oct 30, 2020 17:25:37 GMT
|
Still cant get these sorted, Kit Car people cant give me the measurements I need at the moment so still looking.. The previous link has a picture showing the blade at 200mm long, and the large diameter as 37mm long? But £100 each does seem a lot |
| |
|
|
elfman
Part of things
Posts: 394
|
|
|
|
|
Sorry should have explained better Its not the single blade i need the measurements of its the Kit they do for the front of the Kit car...I've asked for 3 measurements to see if it will fit my car or might do with a few adjustments and save me a lot of work... but they don't keep them in stock. And for some reason don't know the measurements! Which is odd as i can give a measurement for any part of my chassis as i drew it on CAD first. But they will try and measure one of their cars which is locked away somewhere, so fingers crossed.
Failing that i will have to make the 2 bars from scratch using 2 x 200mm blades.
I've also been quoted £200 each for blades ! That's more than a lot of the tubing in the car...
Never simple is it..
|
| |
|
|
