hi all
I'm going to be selling my viva E project soon. had it about 7 years now and it always gets pushed to one side. so decided to
move it on. I'm in no mad rush to sell it so no stupid offers.
its currently a shell on a spit with a load of parts to go with it. 80% of the parts are there for it.
parts it comes with:
2 boot lids 1 steel 1 fibreglass
both front doors
bonnet
new gaz adjustable coilovers front and rear
numerous new super pro bushes
electric power steering column and harness
simitar rear axle
jaguar power lock rear diff
reinforced front subframe with adjustable upper arms and caster arms (not pictured)
rover 800 rear disc brakes
adjustable upper and lower rear arms
steering rack
front and rear seats
firenza grill
front and rear bumpers
all the glass
chassis strengthening kit
magnum antiroll bar and bushes
7 dial dash
aftermarket pedal box
fibreglass front bib (not pictured)
drivers outer sill (not pictured)
drivers foot well
plus loads of other bits and bobs
i will also include a complete sport parts manual
the shell does need welding i have done gearbox cross member mounts boot foot coilover turrets passenger inner and outer sill
plus passenger footwell. it need the drivers inner and outer sill foot well and front end welding up. it comes with a spare
front end foot well and outer sill panel
there is no engine or gearbox as i was fitting a v8 but decide to keep that for another project
any questions message me on here.
price wise I'm looking for £4000 ono for the lot.
I'm going to be selling my viva E project soon. had it about 7 years now and it always gets pushed to one side. so decided to
move it on. I'm in no mad rush to sell it so no stupid offers.
its currently a shell on a spit with a load of parts to go with it. 80% of the parts are there for it.
parts it comes with:
2 boot lids 1 steel 1 fibreglass
both front doors
bonnet
new gaz adjustable coilovers front and rear
numerous new super pro bushes
electric power steering column and harness
simitar rear axle
jaguar power lock rear diff
reinforced front subframe with adjustable upper arms and caster arms (not pictured)
rover 800 rear disc brakes
adjustable upper and lower rear arms
steering rack
front and rear seats
firenza grill
front and rear bumpers
all the glass
chassis strengthening kit
magnum antiroll bar and bushes
7 dial dash
aftermarket pedal box
fibreglass front bib (not pictured)
drivers outer sill (not pictured)
drivers foot well
plus loads of other bits and bobs
i will also include a complete sport parts manual
the shell does need welding i have done gearbox cross member mounts boot foot coilover turrets passenger inner and outer sill
plus passenger footwell. it need the drivers inner and outer sill foot well and front end welding up. it comes with a spare
front end foot well and outer sill panel
there is no engine or gearbox as i was fitting a v8 but decide to keep that for another project
any questions message me on here.
price wise I'm looking for £4000 ono for the lot.