Do Saab alloys fit Vauxhalls?

[at200]

Specifically, do genuine Saab 15" x 6.5" alloys which are listed as compatible with Saab ng 900 and 9-3, and 9-3 SS from '03 onwards, and 9-5 1998-2010, fit Vauxhalls from the same years, or indeed any other cars? Thanks.

[Ian]

What Vauxhall are you looking at fitting them to?

As long as they are both 5 stud they should fit, 5x110 for vauxhall. I have some 17's for an astra G in my garage

look like this:
retrorides.proboards.com/thread/168227/5x110-vauxhall-alloy-wheels-wirral

[at200]

Thanks, Ian. I have a set I am selling but haven't had any interest yet, even though they are cheapish. It's only been a couple of days though. I was wondering if the Saab market is too small but wouldn't want to advertise them as fitting Vauxhalls if they didn't.

[colnerov]

Hi, if you list the correct size, PCD and the ET, let people make their own mind up. I find it amusing that some people put wheels up for sale on Ebay without half the information, particularly space saver wheel and tyre they put the tyre size and don't tell you what car it's off.

Colin

[paul99]

Check the offset, the wheels from the 900/9-3 (to 2002) will 'fit' on the 9-3ss, but will scrape the wheel arch for example....

[at200]

Thanks, guys. I did find a few forums where people seemed to be fitting Saab wheels on Vauxhalls and vice versa but couldn't find a definite answer. They are 5 stud, 15" x 6.5.

I'll probably put them on here or eBay if I get no response on the Saabs forums.

[iamgroot]

Bit late to the party here, but saab and vauxhall 5 stud alloys will definitely fit each other PCD and centre bore wise, but as for offset, there could possibly be issues in some cases, from vectra B onwards (1998?)for sure, it was GM's "Epsilon" Platform. Until what year this is true for I am not sure, my Vectra C daily is still the same fitment but I have heard that the new(ish) astra GTC isn't, though I haven't researched that.

Even if this info is too late for you, it might help someone else.

[at200]

Thanks for the info, Groot. I managed to sell them on a forum a few weeks ago, but I am sure the info will help someone else.

[at200]

Thanks for the info, Groot. I managed to sell them on a forum a few weeks ago, but I am sure the info will help someone else.

[Deleted]

Vectra B,C Astra H, Saab 9-3, 9-3SS 9-5 are all 5x110

Insignia, Astra J etc are all 5x120

HOWEVER Vectra C, 9-3 SS etc depending on the model need a 16" minimum to clear the brake calipers (anything with the 314mm upgrade needs 16" minimum, they barely go over the top. 15s will not go over them.

(I've had both a Vec C and a 9-3 SS)