|
|
|
|
|
|
Is there any wheels that will fit the six stud bedford cf.What wheel pcd and what if its twin rear wheel could a lot wider wheel be fitted instead of a twin rear wheel,Thanks
|
| |
Peace,Max signature height = 80px
|
|
colnerov
Posted a lot
Posts: 2,834
Member is Online
|
|
|
|
|
Hi, Ford Transit six stud are the same, as are Iveco I believe. Transit and CF wheels are not interchangeable both ways, it's to do with the shape of the wheel and it interferes with the brake drum and stopping it seating properly, But I can't remember which way it is now because I've been to sleep since then. Ford at one time did a mid-range van that used the six stud axles but with a single wheel. Also FX4 taxi's had similar. Other than that I can't be more help.
Colin
|
| |
|
|
|
|
|
|
|
|
Thanks I'm wondering if the holes in the wheels could be welded up and circles be drilled instead thank you
|
| |
Peace,Max signature height = 80px
|
|
|
|
|
|
|
|
I've looked at this for my transit, unless you get Alcoa to make you some specials (not as hideous as you would imagine) then there isn't anything stock that will fit the twin wheeler.
I fitted Euroliners to clean the looks up a bit.
I did drool over a set of jag slot mags which just had enough meat to redrill but the offset is so wrong its not possible to use them, don't forget they will be face to face on the rears and i'm not sure how well alloys will take to this.
I don't think transit and the CF are the same PCD - not the 6 stud axles anyway. 14" Transit and 16" Iveco 6 stud wheels from the twin wheelers are though.
|
| |
|
|
